This page is an overview of MAGNET_GENERAL_CATALOG on page124
Move to the page after second(s).
Now go to the page by clicking "Open the e-Book" button.
This e-Book is not available in your environment.
MAGNET_GENERAL_CATALOG
Model OC OIL ELIMINATORA powerful tool to assist purification of coolant.An example of fabricationAn example of usageModel KBS BARREL TYPE SEPARATOR105 190PulleySetscrew100852552015175140 50Mounting holeρEÁEHoseρE2ÁE0040155Suspensionlength 200BLHOC-2This model is designed to separate and collect oil filmsfloating on the surface of liquid in waste liquid tanks ofgrinding fluid (coolant) and washing liquid by a specialendless belt to assist purification and recycling of liquid.EApplicationE●Collection of floating oil in machined parts washingtanks and degreasing processes.●Collection of oil in water soluble grinding coolant.●Collection of oil floating in plant waste water.EFeaturesE●This oil eliminator eliminates oil films efficiently andautomatically discharges them as waste oil.●Simple casing, light weight and compact for installationin limited space.●Compared with the filter system, the endless belt has alonger service life and the running cost is very low.●The belt is highly resistant to heat and chemicals andcan be used with acid, alkali and chemical products.(However, when liquid is hot, its viscosity drops to aff ectthe collection effi ciency.)●The eliminator can be run continuously or controlled by atimer or programs. The 24-hour timer can be set to anyintervals in increments of 10 minutes for intermittentoperation.●In addition to the standard belt (suspension length: frombottom of main unit to center of weight 200 mm/beltwidth 40 mm), special types such as L=250, L=300 andheat resistance (100℁E) specifi cations are also available.※The power source can be changed to a single-phase, 100V only by changing internal wiring.※Accessories 1. Standard belt (suspension length: from bottom of main unit to center of weight 200 mm/belt width 40 mm)ÁE 2. Discharge hose (overall length 600 mm/OD ρE2 mmEÁEModel Capacity Power Source Motor Mass RemarksOC-2 4L/h Single-phase 200 VAC 3.5W 4.2kg/9.2 lb Changeable to 100 VACKBS-15BEApplicationEThis model is designed to automatically separate mediaand iron products after barrel polishing. It can also beapplied to such operation as to automatically separateiron chips from nonferrous chips and products frompolishing media.EFeaturesE●The powerful permanent magnetic drum ensureseffi cient separation.●Since a demagnetizer is provided under the transferbelt as a standard feature, workpieces can bedemagnetized as needed.●Casters facilitate relocation and installation.EmmEEnE］Model ProcessingCapacity Power Source MotorDemagnetizer CapacityHopper VolumeDimensionsMassCurrent Capacity L B HKBS-15B 20L/min Single-phase 100 VAC 100W 9A 0.9kVA 20L955EE7.6EE60EE8.1EE95EE1.3EE00kg/220 lbKBS-30B 30L/min 3-phase 200 VAC 200W 10A 2kVA 30L 590EE3.2EE145kg/319 lbOC / KBS117 LIFTINGMAGNET MAGBORE* CHIP & SLUDGECONVEYANCE EQUIPMENTENVIRONMENTALEQUIPMENTMAGNETIZER ANDDEMAGNETIZERMAGNETIC EQUIPMENTFOR CONVEYANCEMAGNETICSEPARATORSMEASURINGTOOLSPOWERFUL MAGNETICSEPARATORSMEASURINGINSTRUMENTSMAGNETICMATERIALSMAGNETIC TOOLS & EQUIPMENTFOR WELDING OPERATIONENVIRONMENTAL EQUIPMENT