BookTitleMAGNET_GENERAL_CATALOG

Summary

MAGNET_GENERAL_CATALOG

※The AC adapter (input 100 VAC, 50/60 Hz, output 2.7 VDC, 0.5 A,cord length 1.9 m) is included as a standard accessory.�E�mm�E�En�E�］Model Battery Rating MassKMDP-16A 2.4V2000mAh 0.3kg/0.6lbKMDP-16AKMDH-5AKMDH-P21For both AC and DCON/OFF switchρE5.526(Demagnetizing area)264NP.ρE0ρE5.5DC jackModel Power Source Source Capacity Eff ective Demag.WidthDimensionsMassWidth Length HeightKMDH-5A Single-phase 100 VAC, 50/60 Hz 70VA 50�E�E.96�E�E86�E�E.38�E�E102�E�E.01�E�E119�E�E.68�E�E2.3kg/5.1 lbModel Power Source Source Capacity Working Rate Remote Operation Demag. Hole Dia. MassKMDC-40 Single-phase 100 VAC, 50/60 Hz 75VA 20% ED,1 minute max.Momentary input byuse of pushbutton ρE0�E�E.57�E�E0.9kg/2 lbModel Power Source Source Capacity Working Rate MassKMDH-P21 Single-phase 100 VAC, 50/60 Hz 450VA 20% ED, 10 seconds max. 3kg/6 lb※The height is up to the grip. ※2 m cord is included. The plug is provided with a ground pin. ※A diff erent-voltage type (special type) is also available. ※The power plug is of tracking resistance type.●The demagnetizer is turned on while thepushbutton switch is held pressed andturned off when you release it.●The button must be held pressed whiledemagnetizing is going on.●Turn off the demagnetizer after it has beenmoved more than 100 mm away from thedemagnetized workpiece.●Power is applied only while the pushbutton switch isheld pressed for demagnetization.●Turn off the demagnetizer after moving it away more than100 mm from the demagnetized object.●If the demagnetizer is turned onfrequently, the body temperaturerises. If the temperature rises toohigh, it is indicated by an overheatalarm seal. Stop using it for a while.How to useHow to use �E�Application�E�Easy demagnetization of a wide variety of magnetizedobjects including tools such as drills, milling cutters,reamers and cutters, round workpieces and measuringinstruments such as slide calipers.�E�Features�E�●Light weight, compact and easy operation.●Fine chips sticking by attraction to drills, reamers, etc.can be removed while they remain mounted onmachines.KMDC-40Model KMDP PEN TYPE DEMAGNETIZERModel KMDH HANDY TYPE DEMAGNETIZERModel KMDH-P PINPOINT TYPE DEMAGNETIZERModel KMDC TOOL DEMAGNETIZER�E�Application�E�Recommended where magnetism on the surface of metallic workpieces in general needs to bereduced in a limited area or locally.This is useful to completely eliminate weak magnetism that remains locally in jigs and workpiecesafter they have been demagnetized by a large demagnetizer. It is also useful for demagnetizingcutters of machines and punches and guide pins of press dies while they are mounted.�E�Features�E�●Compact and powerful as a rare earth magnet having strong magnetic force is used at the endof the rotary magnetic field.●A re-chargeable battery is used as a power source of the motor. No need to replace the battery.Power can also be supplied with the included AC adapter if the battery has reached its life.●Simple construction and simple appearance.●An environment friendly nickel hydrogen battery is used.�E�Application�E�Suitable for demagnetizing tools such asdrills, cutting tools, cutters and magnetizedslide calipers. These can also be used fordemagnetizing large steel plates partially.�E�Features�E�●Compact and handy.�E�Application�E�An alternating fi eld is produced at the tip and bottom by an AC power source, which is brought intocontact with a workpiece and then moved away. Then the magnetic fl ux density on the surface is reducedlocally. This demagnetizer works eff ectively in demagnetizing molds and large materials partially.�E�Features�E�●Since this demagnetizer produces a strong magnetic fi eld at the tip, it can eff ectively demagnetizeplaces that are diffi cult to demagnetize with a conventional table type or handy type demagnetizer.●The magnetizing eff ect is powerful, but the attracting force is not strong. Thus, the tip part can bebrought into contact with a small area for easy handling.●A thermo label is attached to the tip part, which warns a temperature rise due to frequent, repeateduse. When the thermo label appears, stop using the demagnetizer until it goes out.EnvironmentallyfriendlyNonwatertightNonwatertightNonwatertightNonwatertightDemagnetization of magnetized tools such as drills,reamers and cutters and measuring instruments!Overheatalarm sealattached�E�mm�E�En�E�］※Cord length 2.5 m (with curled cord). ※The power plug is of tracking resistance type.※The power plug is of tracking resistance type.Working rate 70% ED (Power on 7 minutes and pause 3 minutes)3050Numeric thermo label150□218850 3879 161Cautionp　late Spec. platePlug with ground pinPower cord: 2 mVCTF (1.25 ?, 3-core)(Demagnetizingarea)240KMDT / KMDTR / KMDTC / KMDP / KMDH / KMDH-P / KMDC124LIFTINGMAGBORE* MAGNET CHIP & SLUDGECONVEYANCE EQUIPMENTENVIRONMENTALEQUIPMENTMAGNETIZER ANDDEMAGNETIZERMAGNETIC EQUIPMENTFOR CONVEYANCEMAGNETICSEPARATORSMEASURINGTOOLSPOWERFUL MAGNETICSEPARATORSMEASURINGINSTRUMENTSMAGNETICMATERIALSMAGNETIC TOOLS & EQUIPMENTFOR WELDING OPERATION