Summary
MAGNET_GENERAL_CATALOG
Model CMR NON-CHANGEABLE PERMANENT MAGNETIC CHUCK FOR CEMENTED CARBIDECMR-1018�E�Application�E�These permanent magnetic chucks are designed for securingworkpieces of materials having a relatively weak magnetic propertiessuch as cemented carbide during grinding. They are normally mountedon and held by other chuck for use.�E�Features�E�●The use of a powerful rare earth magnet ensures a suffi cient holdingpower even on cemented carbide materials.Workable area(Example: Clamp groove)LBPH15 B eModel Nominal SizeWork Face Pole Pitch HeightHolding Power MassB L Be P HCMR-1010 100�E�E.93�E�ÁE00�E�E.93�E�E00�E�E.93�E�E00�E�E.93�E�E2�E�E.83�E�E5�E�E�E�E�E�E.19�E�E.07�E�E.11�E�E40�E�E.57�E�E210N(21kgf) on□50×t25 carbide test piece3 kg/ 6.6 lbCMR-1018 100�E�E.93�E�ÁE80�E�E.08�E�E180�E�E.08�E�E5.5kg/12.1 lb�E�mm�E�En�E�］Model CMR-H NON-CHANGEABLE PERMANENT MAGNETIC CHUCK FOR CEMENTED CARBIDECMR-H0709 CMR-HW0709 �E�Application�E�Permanent magnetic chucks for grinding operations to hold materials such ascemented carbide that cannot be secured fully.�E�Features�E�CMR-H●Suitable mainly for relatively large and thick workpieces. The gap characteristic isexcellent.●The holding power has been increased 1.5 times max. from the conventional chucks.●The separator part is made of stainless steel to enhance accuracy stability.CMR-HW●Works well on small and thin workpieces that cannot be held by conventional pitches.●The holding power is 2 times max. (depending on materials) the conventional chucks.●The separator part is made of stainless steel to enhance accuracy stability.■CMR-H type holding power characteristics●Relation between gap and holding power using □50 carbide test piece■Comparison of side slip holding powerCarbide test piece (G8 t5 ÁE20 ÁE30)CMR-HW0709�E�E�E�E�E�E�E�CMR-H0709�E�E�E�E�E�E�E�CMR-1010�E�E�E�E�E�E�E�E234560Side slip holding power�E�Egf�E�E50 0.120151050CMR-H0709�E�E�E�E�E�E�E�CMR-HW0709�E�E�E�E�E�E�E�CMR-1010�E�E�E�E�E�E�E�E.2 0.3 0.4 0.5�E�Egf�E�Holding powerGap(mm�E�Side slip measuringdirectionModel Nominal Size Height Pole Pitch MassCMR-H070965�E�E.55�E�ÁE90�E�E.54�E�E30�E�E.18�E�E�E�E�E�E�E� 0.23�E�E.11�E�E.11�E�E.3kg/2.8 lbCMR-HW0709 2�E�E�E�E�E� 0.07�E�E.03�E�E.03�E�CMR-H1215120�E�E.72�E�ÁE50�E�E.90�E�E33�E�E.29�E�E�E�E�E�E�E� 0.23�E�E.11�E�E.11�E�E.6kg/7.9 lbCMR-HW1215 2�E�E�E�E�E� 0.07�E�E.03�E�E.03�E�［mm�E�En�E�］29 CHUCKCONTROLLERSPERMANENTMAGNETIC CHUCKSPERMANENTELECTROMAGNETIC CHUCKSBLOCKSFOR MCVACUUMCHUCKSPROMELTA*SYSTEMSINE BARCHUCKSHOLDINGTOOLSBLOCKS, HOLDERS,MINI CHUCKSMEASURINGTOOL HOLDERSMAGNETICTOOLSMAGNETICHOLDERSELECTROMAGNETICCHUCKSPERMANENT MAGNETIC CHUCKS
