This page is an overview of MAGNET_GENERAL_CATALOG on page50
Move to the page after second(s).
Now go to the page by clicking "Open the e-Book" button.
This e-Book is not available in your environment.
MAGNET_GENERAL_CATALOG
・撰ｼｭ・趣ｼ托ｼｰ・・・撰ｼ撰ｼ趣ｼ撰ｼ抵ｼ撰ｼ趣ｼ撰ｼ厄ｼ撰ｼ趣ｼ撰ｼ費ｼ撰ｼ趣ｼ撰ｼ佰・77BallvalveVacuumconnection425Drain valveCoupler20PM (Nitto Kohki)Reverse jet connectionﾏ・ﾏ・.5(2)Suction portshapeEvacuateReverse jet VacuumBall valve(3 places)StopperLe Suction portBeHhB1B2P1L1L2P2KVR-AV1530VPU-E10-AV(Technical tie-up withTaiyo Tec Company)Vacuum systemrequired additionally・ｻApplication・ｽNonferrous and nonmagnetic materials can be held and machined.These chucks are suitable for grinding plastics, aluminum, brass,stainless steel, ceramic and glass by machine tools. They can also beused for light duty cutting if workpieces can be held fi rmly.・ｻFeatures・ｽ笳蒐o masking is required to reduce the setup time:Place a workpiece, apply grinding fl uid and turn the valve. That is allrequired. Since the suction holes outside the workpiece areautomatically closed, troublesome masking is not required andgrinding can be started soon.笳拾asy valve cleaning:An original modular design that causes little clogging due to sludgefacilitates maintenance to reduce the running cost.笳拾nhanced safety:An original construction is employed that closes the auto valveinstantly should a workpiece move during grinding. This design causesno vacuum break and maintains a certain level of holding power.笳愁ry operations supported:In dry grinding operations using no grinding fl uid, the chuck can beused with minimum necessary masking only.・ｻApplication・ｽA vacuum system dedicated to the auto valve type vacuum chucks. Theshuck side is evacuated continuously in order to eff ectively maintain theatmospheric pressure on the workpiece on the chuck work face.・ｻFeatures・ｽ笳就 vacuum evacuation system, fi lter, vacuum tank and vacuum gage areincorporated neatly.笳輯ince connectors are provided, the pipes of vacuum and reverse jetrequired for control of the vacuum chuck can be connected easily.笳就 difference in pressure over 80 kPa (600 mmHg) can be obtainedcontinuously.・ｻmm・・n・会ｼｽModel Nominal SizeWork Face Suction Port Pitch No.ofSuction PortsMounting Face HeightMass ApplicableB? L? Be Le P? P? B? L? h H Vacuum SystemKVR-AV1018 100・・.93・嘉・75・・.89・・00・・.93・・75・・.89・・7.5・・.26・・32・・.20・・2・・.47・・1.5・・.45・・72 98・・.86・・195・・.68・・0・・.79・・70・・.75・峨8kg/ 17.6 lbVPU-E10-AVKVR-AV1530 150・・.90・嘉・00・・1.8・・50・・.90・・00・・1.8・峨96・・.67・・40・・.45・・2・・.47・・88 146・・.75・・320・・2.6・・18kg/ 39.7 lbKVR-AV2040 200・・.87・嘉・00・・5.7・・00・・.87・・00・・5.7・・144・・.89・・48・・3.7・・388 196・・.71・・420・・6.5・・30kg/ 66.1 lbKVR-AV3060 300・・1.8・嘉・00・・3.6・・00・・1.8・・00・・3.6・・228・・.97・・40・・1.2・・908 296・・1.6・・620・・4.4・・66kg/145.5 lb窶ｻKVR-AV1530, KVR-AV2040 and KVR-AV3060 have places where no suction ports are provided partially.縲窶ｻClamp parts are included.Model KVR-AV AUTO VALVE TYPE VACUUM CHUCKModel VPU-E-AV VACUUM SYSTEM DEDICATED TO AUTO VALVE TYPE VACUUM CHUCKAn epoch-making vacuum chuck that requires no masking!Dry/wetoperationsModel EvacuationVolumeContinuousPressureSuctionPortCompressed Air Dimensions TankCapacity MassPressure Consumption Supply port Out Dia. HeightVPU-E10-AV 110N?/min (80 kPa (600 mmHg)or over) 3/8 500?600kPa・・?6kgf/cm2・・180N?/min 1/4 ﾏ・77・・0.9・・25・・6.7・・15? 25kg/55 lb窶ｻThe capacity of a compressor to use must be 2.5 kW or over. ﾏ・2 hose, 10 m long, is included as an accessory.・ｻmm・・n・会ｼｽPiping of vacuum system(Provide compressor.)Compressed airVacuum system Vacuum chuckVacuum EvacuationReverse jetPatented43 CHUCKCONTROLLERSPERMANENTMAGNETIC CHUCKSPERMANENTELECTROMAGNETIC CHUCKSBLOCKSFOR MCPROMELTA*SYSTEMSINE BARCHUCKSHOLDINGTOOLSBLOCKS, HOLDERS,MINI CHUCKSMEASURINGTOOL HOLDERSMAGNETICTOOLSMAGNETICHOLDERSELECTROMAGNETICCHUCKSVACUUM CHUCKSVACUUMCHUCKS