This page is an overview of MAGNET_GENERAL_CATALOG on page86
Move to the page after second(s).
Now go to the page by clicking "Open the e-Book" button.
This e-Book is not available in your environment.
MAGNET_GENERAL_CATALOG
Model KM PERMANENT MAGNETIC HOLDERList of permanent magnetic holdersEmbedded in a jig (Example)Names of facesUpper limit of working temperatureSize Height OD “h”Tolerance Plating Painting PeripheralKnurlingStainlessSteel Spec.Heat-ResistanceSpec.ρE5ÁE8 KM-0005ÁE3 KM-0005LρE7ÁE8 KM-0007ÁE3 KM-0007LρE0ÁE8 KM-0010H KM-0010J KM-0010H-SUSÁE5 KM-H001 KM-001ÁE8 KM-T001ρE5ÁE5 KM-H0015 KM-0015ÁE8 KM-T0015ρE8 ÁE8 KM-0018H KM-0018J KM-0018H-SUSρE0ÁE5 KM-H002 KM-002ÁE8 KM-T002ρE5 ÁE0 KM-0025H KM-0025J KM-0025H-SUSρE6ÁE5 KM-H0025 KM-025CÁE0 KM-T0025ρE0ÁE5 KM-03CÁE3 KM-T003ρE0 ÁE0 KM-04C KM-T004TρE0 ÁE0 KM-05C KM-T005TρE0 ÁE0 KM-07CρE0 ÁE5 KM-08C26ÁE6 ÁE5 KM-025S26ÁE0 ÁE5 KM-06SEApplicationECan be used to hold down drawings, rules and paperpatterns. The holders with a tapped hole on the backcan be used widely by installing them on jigs. Can beincorporated in press dies. Can hold workpieces duringwire cutting.EFeaturesE●Six types of specifications; OD tolerance, plating,painting, peripheral knurling, stainless steel spec.and heat-resistance spec. are available for selectionaccording to applications.●By matching the OD Eh Etolerance, the holders canbe incorporated in dies.●A tapped hole on the back makes the holders usefulin various applications.The holding power drops as body temperature rises. The following typesare available. The original holding power returns to the original levelwhen the temperature drops to normal temperature.■Type A (Alnico magnet used)Superior in terms of temperature. The holding power as high as 85% canbe maintained at 350℁Ewhen the holding power at 20℁Eis 100%. Thistype can be used up to 400℁Eintermittently for a short period of time.■Type B (Samarium-cobalt type rare earth magnet used)The holding power drops to about 95% at 100℁Eand to about 85% at200℁Ewhen the holding power at 20℁Eis 100%. For continuous use,the upper limit is 150℁Eand for intermittent use for a short period oftime, this type may be used up to 200℁E■Type C (Neodymium rare earth magnet used)The holding power drops to about 85% at 50℁Eand to about 70% at100℁Ewhen the holding power at 20℁Eis 100%. The upper limit forarea……Additionally workable. continuous use is 100℁ENonmagneticmaterialK M -0 0 05 KM-0007K M -0 0 1 KM-002MagneticmaterialAttractive face Rear faceSide faceKM-0005KM-0007KM-001KM-0015KM-002KM-025CKM-03CKM-04CKM-05CKM-07CKM-08CKM-0005LKM-0007LKM-HKM-TKM-025S KM-06SD 1ρE2H 1H 226D1ρE2 ρE23226H 1H 2H 1H 2ρE1ρE2indicates the attractive face.KM-0005KM-0005LKM-0007KM-0007LKM-001KM-0001KM-0015KM-T0015 KM-T002KM-002※ The holding power may drop when the holder is worked onadditionally. In particular, additional work in the radialdirection has large influence on the holding power andtherefore, must be limited to a minimum necessary scope.79 CHUCKCONTROLLERSPERMANENTMAGNETIC CHUCKSPERMANENTELECTROMAGNETIC CHUCKSBLOCKSFOR MCVACUUMCHUCKSPROMELTA*SYSTEMSINE BARCHUCKSHOLDINGTOOLSBLOCKS, HOLDERS,MINI CHUCKSMEASURINGTOOL HOLDERSMAGNETICTOOLSMAGNETICHOLDERSELECTROMAGNETICCHUCKSMAGNETIC HOLDERS