Summary
MAGNET_GENERAL_CATALOG
�E�Application�E�Suitable for temporary holding during drilling and assembly.�E�Features�E�●Two magnets combined for easy angle setting.●An angle scale provided. (KM-12W)●The magnetic force can be turned on and off by operating the lever.(KM-12W)●The V-groove allows the holder to be attached to certain poles andcurved surfaces in addition to the flat surface. (KM-12W)KM-06WHoldingPower200NKM-12WHoldingPower1300NModel KM-W MAGNETIC HOLDER�E�mm�E�En�E�］Model Holding PowerHolder DimensionsLength HoldingAngle MassWidth Length HeightKM-06W 200N�E�E20kgf�E�E26�E�E.02�E�E0�E�E.36�E�E5�E�E.98�E�E29�E�E.07�E�Free0.7kg/1.54 lbKM-12W 1300N�E�E30kgf�E�E50�E�E.96�E�E17�E�E.60�E�E5�E�E.16�E�E73�E�E0.75�E�E4.5kg/9.92 lb※The holding power is per holder on one side and based on a test piece of SS400, 10 mmthick, ground surface.�E�Application�E�Suitable for mating and keeping jointing parts of iron plates ormembers during welding work.�E�Features�E�A powerful holding type by use of a high-performance permanent magnet.MT-A-2●Both inside and outside welding are possible. ●Any desired holding angle can be set in a range of 45° and 135°(angle scale provided).●ON/OFF function and V-groove provided.MT-A-4●Any desired holding angle can be set in a range of 30° and 90°(angle scale provided).●Angle adjustment with a handle.●ON-OFF function provided.�E�Application�E�Suitable as a holding tool for welding on such work sites ofconstruction, bridge, ship building and piping.�E�Features�E�●The magnet part has a minimum necessary free rotating anglerange for easy mounting on workpieces.●The exterior of the magnet holder part is made of aluminum toprevent adhesion of iron powder on the top and side faces.●Model WK-T3A has a construction that is highly resistant to heat.●These clampers have a large mechanical strength towithstand rough handling.5066109 109254422135ρE08 21902.5�E��E��E��E��E��E�55505125150°60�E�１６．７！E5.258.51.55575.258.51.5�E�１６．７！E0�E�２０６０４５１３５４５６０１２０１３５９０（１５７）（１５７）ρE4�E� �E��E��E��E��E��E��E� �E��E� �E��E��E��E��E� �E��E��E�Ａ�E�２（８７）O31、Eote 1〉、Enside welding、E、Eutside welding〉Both welding types possible byusing an adequate attractive face.WeldingpartWeldingpartHandle�E�E07�E�E0°�E�E52�E�E0°Max. 90°Max. 30°8052GG606 48 6137120MT-A-4MT-A-2WK-3AWK-T3A An example of usageModel MT-A MAGSUPPORTER*Model WK CLAMPER FOR WELDING�E�mm�E�En�E�］Model Holding PowerHolder Dimensions HoldingAngle MassWidth Length HeightMT-A-2 800N�E�E80kgf�E�ÁE 50�E�E.96�E�E60�E�E.36�E�E5�E�E.16�E�E5°ー135°3.5kg/7.71 lbMT-A-4 1500N�E�E50kgf�E�ÁE 60�E�E.36�E�E20�E�E.72�E�E2�E�E.04�E�E0°ー 90°5 kg/11.0 lbThe holding power is based on a test piece of SS400, 10 mm thick, ground surface.Model Max. Temperature Holding Power MassWK-3A 60℁E000N�E�E00kgf�E�ÁE 2.3kg/5.07 lbWK-T3A 180℃The holding power is based on a test piece of SS400, 10 mm thick, ground surface.Holdingpower1500NHoldingpower800NThese holders cannot be used for work where heat is applied for long hours. If the magnet is subjected to high temperature,Precautions for use its magnetic force will drop or be lost suddenly, causing the workpiece to come off the attractive face. Exercise caution.MT-A / WK / KM-W88LIFTINGMAGBORE* MAGNET CHIP & SLUDGECONVEYANCE EQUIPMENTENVIRONMENTALEQUIPMENTMAGNETIZER ANDDEMAGNETIZERMAGNETIC EQUIPMENTFOR CONVEYANCEMAGNETICSEPARATORSMEASURINGTOOLSPOWERFUL MAGNETICSEPARATORSMEASURINGINSTRUMENTSMAGNETICMATERIALSMAGNETIC TOOLS & EQUIPMENTFOR WELDING OPERATIONMAGNETIC TOOLS & EQUIPMENT FOR WELDING OPERATION
