BookTitleMAGNET_GENERAL_CATALOG

Summary

MAGNET_GENERAL_CATALOG

�E�Application�E�Jigs developed for automatic welding of steel plates to hold steel plates and backing materials. Thesejigs can be used to hold cut-out pieces during EPM welding operations, to straighten workpieces andto secure stacked steel plates during fusing of stacked steel plates.�E�Features�E�●Holding and releasing workpieces can be controlled electrically.●Workpieces are secured to a welding frame by a strong magnetic force and therefore warping ofsteel plates due to welding heat can be prevented.●Drip-proof construction for outdoor operations. Highly resistant to impact and heat.※The rectifi er is of special specifi cations according to the number of magnets used.�E�Application�E�Suitable for securing workpieces during light duty work such as chamfering.�E�Features�E�●The periphery or four faces of workpieces can be worked duringchamfering, for example, in one chuckingto improve work effi ciency.●Damage to workpieces by mechanicalclamping can be prevented.�E�Application�E�Suitable for securing workpieces during light duty work suchas chamfering.�E�Features�E�●The built-in compact rectifi er eliminates a need of a powersource board, requiring simple wiring only.●The magnet specifi cations are all the same as Model CEM.d 1HρE bd 1bMountingpart MountingpartHρE、E type〉、E type〉EMA-□AModel EMA WELDING JIG FOR ONE FACE WELDINGModel CEM ELECTROMAGNET FOR CHAMFERINGModel CEM-SR ELECTROMAGNET WITH RECTIFIER FOR CHAMFERING�E�mm�E�En�E�］�E�mm�E�En�E�］�E�mm�E�En�E�］ModelHolding Power Dimensions Power SourceWorkingSteel Plate Rate Mass20mm thickSteel Plate50mm thick D H d1 b Mounting hole Voltage CurrentEMA-25-A20kN�E�E000kgf�E�E4kN�E�E400kgf�E�E45�E�E.64�E�E00�E�E.93�E�E90�E�E1.4�E�E0�E�E.75�E�EーρE1�E�E.82�E�E00VDC1.0 A100%ED30kg/66.1 lbEMA-25-C 150�E�E.90�E�E3ーM16�E�E.62�E�EMA-26-A 21kN�E�E100kgf�E�E6kN�E�E600kgf�E�E55�E�E0.0�E�E20�E�E.72�E�E05�E�E2.0�E�E4ーρE6�E�E.02�E�E1.4 A 40kg/88.1 lbEMA-30-A25kN�E�E500kgf�E�E0kN�E�E000kgf�E�E96�E�E1.6�E�E50�E�E.90�E�E40�E�E3.3�E�E3ーρE3�E�E.90�E�E.75A 65kg/143 lbEMA-30-C 200�E�E.87�E�E3ーM20�E�E.78�E�Model Max. HoldingPowerDimensions RatedVoltageRatedCurrentWorkingRate MassρE h T H P ρE □WCEM-16 1000kgf 160�E�E.29�E�E64�E�E.51�E�E15�E�E.59�E�E79�E�E.11�E�E140�E�E.51�E�E14�E�E.55�E�E170�E�E.69�E�E0 VDC0.4 A 100%EDApprox. 14 kg/30.8 lbCEM-23 2000kgf 230�E�E.05�E�E76�E�E.99�E�E20�E�E.78�E�E96�E�E.77�E�E200�E�E.87�E�E22�E�E.86�E�E250�E�E.84�E�E0.7 A Approx. 28 kg/61.7 lbModel Max. HoldingPowerDimensionsInput PowerConsumptionWorkingRate MassρE h T H P ρE □WCEM-16SR 1000kgf 160�E�E.29�E�E4�E�E.51�E�E5�E�E.59�E�E9�E�E.11�E�E40�E�E.51�E�E4�E�E.55�E�E70�E�E.69�E�ESinglephase,100 VAC41W100%ED14kg/30.8 lbCEM-23SR 2000kgf 230�E�E.05�E�E6�E�E.99�E�E0�E�E.78�E�E6�E�E.77�E�E00�E�E.87�E�E2�E�E.86�E�E50�E�E.84�E�E72W 28kg/61.7 lbRectifi er required additionallyRectifi er required additionallyρE���E� �E�Ｈ�E��E�□�E��E�－ρE��CEM-16CEM-23SRRectifi er added to electromagnetic CEM for chamfering!�E��E��E��E��E��E��E��E��E��E��E��E��E��E��E��E� �E��E� �E��E��E��E��E�２Ａ�E�Ｋ�E��E��E�２Ｄ170Cable: 3 m �E�－ρE��Cable: 2 m54�E��E�□�E�ρE���E��E� �E�４－ρE��These holders cannot be used for work where heat is applied for long hours. If the magnet is subjected to high temperature,Precautions for use its magnetic force will drop or be lost suddenly, causing the workpiece to come off the attractive face. Exercise caution.※Applicable rectifi ers: RH-M102C/M105B/M205B/M210B.GS / HL-E / WKS / EMA / CEM / CEM-SR92LIFTINGMAGBORE* MAGNET CHIP & SLUDGECONVEYANCE EQUIPMENTENVIRONMENTALEQUIPMENTMAGNETIZER ANDDEMAGNETIZERMAGNETIC EQUIPMENTFOR CONVEYANCEMAGNETICSEPARATORSMEASURINGTOOLSPOWERFUL MAGNETICSEPARATORSMEASURINGINSTRUMENTSMAGNETICMATERIALSMAGNETIC TOOLS & EQUIPMENTFOR WELDING OPERATION